Player Collectors Question

[BiggioDiogu759]

Would any player collector want a player sign for thier card room?

What I mean by this is:

48 inches long by 7 1/4 inches wide
Would include:
players name (nickname is name is too long) and #
4 toploaders for cards (2 on each side of name)
Spot for auto (might slide out so you can send it TTM or get it IP)

I will get a picture tommorow.

PLMK if you might like something like this. Thanks.

 

[otgoal]

Four feet long? Might be tough to ship.

 

[jaxbraves]

Would any player collector want a player sign for thier card room?

What I mean by this is:

48 inches long by 7 1/4 inches wide
Would include:
players name (nickname is name is too long) and #
4 toploaders for cards (2 on each side of name)
Spot for auto (might slide out so you can send it TTM or get it IP)

I will get a picture tommorow.

PLMK if you might like something like this. Thanks.

I think this would be to big but interested in seeing a pic when you get it.

Rich

 

[BiggioDiogu759]

WOW That was quick

Well, what size would you guys think would be effective, and still easy to ship?

 

[jaxbraves]

WOW That was quick

Well, what size would you guys think would be effective, and still easy to ship?

Really not sure yet. If it comes in different sizes that might be a better option. Is this made of clear plastic acrylic ?

Rich

 

[BiggioDiogu759]

Really not sure yet. If it comes in different sizes that might be a better option. Is this made of clear plastic acrylic ?

Rich

No made of wood.

I can also make 8x10 customs with wooden frame id you think that would work easier

 

[otgoal]

Could you make two 4" by 12" pieces, then hinge it and fold it for shipping?
Then it would unfold to 4x24.

 

[BiggioDiogu759]

So you are saying cut the piece of wood in half, then do one side at a time, then hinge it back together?

 

[jaxbraves]

No made of wood.

I can also make 8x10 customs with wooden frame id you think that would work easier

No, not looking for 8x10 as the walls in my room are filled with various frames etc. The name plate sounds interesting, so if you are making one I will wait for the picture.

Rich

 

[BiggioDiogu759]

Rich, what side would you like or think would work best?

 

[otgoal]

So you are saying cut the piece of wood in half, then do one side at a time, then hinge it back together?

Use two 4x12 pieces, then hinge the back. It would be easier to ship folded to 4x12, but it would open up to 4x24 and the front could look like this:

You could have two card holder on each side (the line down the middle is just to show where the hinged back is).

 

[BiggioDiogu759]

That would probably work. Great idea.

 

[jaxbraves]

Rich, what side would you like or think would work best?

I guess you mean size.....Lets say I do Chipper Jones as the player.
Using the hinged format may or may not work as Chipper has 6 letters and Jones has 5 letters. So trying to center it could be an issue. I think it also depends on how you work the space for the Top Loaders. I like 2 on each side. So adding them to he plate could also have a factor on the total size.
I think if you cut it down 1 foot that might better.

Rich

 

[BiggioDiogu759]

If it doesnt center good, I could do something like Chipster #10 or Chipper #10 or Jones #10

Its all up to you

Is there a way to attch a file from Microsoft Word to The Bench?

 

[BiggioDiogu759]

Thats what I came up with as a rough draft...PLMK.

 

[mintman2]

Sounds like an interesting idea but I think to get any kind of reliable input you might want to make a a couple prototypes, not just computer generated graphics.

 

[BiggioDiogu759]

Sounds like an interesting idea but I think to get any kind of reliable input you might want to make a a couple prototypes, not just computer generated graphics.

I want to do that, but the only problem is that I dont want to put a ton of work into this and not have anyone buy it.

I do like your idea, and might try it.